Determination of nitrogen- and phosphorus-containing pesticide residues in vegetables by gas chromatography with nitrogen-phosphorus and flame photometric detection after gel permeation chromatography and a two-step minicolumn cleanup

An efficient and reliable multiresidue method for determining pesticide residues in a large number of vegetable samples was studied. First, the important target compounds for monitoring, 52 nitrogen- and/or phosphorus-containing pesticides, were selected. The sample was extracted with acetonitrile, and the separated acetonitrile layer was cleaned up by a salting-out step. The acetonitrile extract was purified by gel permeation chromatography that divided the pesticide eluate into 2 fractions; the pesticide fractions were respectively purified by a 2-step minicolumn cleanup in which the second pesticide fraction was loaded on a silica-gel minicolumn. After a Florisil minicolumn was inserted on the silica-gel minicolumn, the first pesticide fraction was loaded on the tandem minicolumn, which was eluted with acetone-petroleum ether (3 + 7). The combined eluate was subjected to dual-column gas chromatography (GC) with nitrogen-phosphorus and flame photometric detection. By application of the optimum cleanup conditions to the 52 pesticides selected, good resolution and low breakdown levels of the pesticides during GC were maintained. Recoveries of the 52 pesticides from fortified cabbage, lettuce, spring onion, and spinach ranged from 72 to 108% with relative standard deviations of 2-17%, except for the recoveries of methamidophos and chlorothalonil. The detection limits of the pesticides were satisfactory (0.001-0.009 mg/kg) for monitoring pesticide residues in vegetables.     

One-step furan ring formation: Synthesis of furo[3,2-h]quinolones

The one-pot reaction of ethyl 1-cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxoquinoline-3-carboxylate ( 6 ) with tert-butyl acetoacetate gave 3-tert-butyl 7-ethyl 9-cyclopropyl-4-fluoro-6,9-dihydro-2-methyl-6-oxofuro[3,2-h]quinoline-3,7-dicarboxylate ( 5 ). This regioselective cyclization was rationalized by the Hard and Soft Acids and Bases principle. By use of a similar furan-forming reaction, we prepared 2-(amino-methyl)furo[3,2-h]quinoline-7-carboxylic acid 4 . Compound 4 showed weak antibacterial activity.     

Fluoride-induced chemiluminescent decomposition of dioxetanes bearing a siloxyaryl moiety to produce an alkyl aryl ketone as an emitter

Tetrabutylammonium fluoride induces the decomposition of 1-tert-butyl-4,4-dimethyl-5-(3-siloxyphenyl)-2,6,7-trioxabicyclo[3.2.0]heptane (4a) in DMSO to form an oxyanion of aromatic ketone (14a) as an emitter with high singlet-chemiexcitation yield comparable with that for a chemically initiated electron exchange luminescence (CIEEL) active dioxetane producing an oxyanion of aromatic ester as an emitter. A 7-siloxynaphthalen-2-yl analog (4b) was found on similar treatment to emit light with the maximum wavelength the longest among CIEEL-active dioxetanes hitherto known.     

Dual-Phase structure of polymer electrolytes comprised of NBR/SBR latex films swollen with lithium salt solution

Dual-phase polymer electrolytes (DPE) that have high ionic conductivity (> 10^?3 S/cm) and good mechanical strength were prepared by mixing NBR and SBR latices and casting films. The latex films absorbed large quantities of lithium salt solution (e.g., 1M lithium perchlorate in γ-butyrolactone) to obtain DPE films but did not dissolve with swelling. The NBR phase is polar and was impregnated selectively with the polar lithium salt solution, whereas the SBR phase is nonpolar and formed a mechanically-supportive matrix. Transmission electron microscopic (TEM), electron energy loss spectral (EELS), and energy-dispersive x-ray (EDX) analyses showed microscopically the dual-phase structure. Evidence for swelling by lithium salt solution was found only in the NBR phase and not in the SBR phase by EDX microanalysis. Ionic conductivity as a function of NBR content or swelling degree showed clearly that a percolation threshold for ionic conductivity exists. © 1994 John Wiley & Sons, Inc.     

π-Allyl nickel halide–oxygen system as a catalyst for polymerization of butadiene

The π-allyl nickel halide-oxygen system was found to be active as catalyst for stereospecific polymerization of butadiene. The catalyst from π-allyl nickel chloride or π-allyl nickel bromide yields the polymer of 90% cis-1,4 content with high activity, whereas the catalyst from π-allyl nickel iodide affords a polymer of 70% or less cis-1,4 content. The catalyst systems can be fractionated into two parts on the basis of solubility in benzene. It is concluded that the catalyst activity originates essentially from the benzene-insoluble nickel complex which is composed of oxygen, halogen, σ-allyl group, and nickel. The structure of growing polymer terminal is discussed in relation to the mechanism of the stereospecific polymerization.     

Interaction between amphiphiles and water molecules in concentrated bilayer aqueous colloids

Interaction between amphiphiles and water molecules in micelle or bilayer structure has been investigated using aqueous colloids of various amphiphiles through the rheological data and the spin-lattice relaxation timeT ₁ of the proton of water molecule.T ₁ of the water proton has been measured by the inversion recovery method and determined as a single exponential relaxation process.The chemical shift of the water proton is almost independent of the amphiphilic concentration; however, it shifts toward a higher magnetic field with increasing temperature in a way similar to that in pure water and in the amphiphilic aqueous systems. These facts mean that there is no significant difference in the magnetic field environment of the water protons in these systems.The water molecule is not necessarily bound in the fully developed micelle or bilayer (rod-like or lamella) structure which induces the high viscosity or high rigidity of the colloidal system. On the other hand, the water molecule is bound in the micelle colloids of amphoteric amphiphiles or amphiphiles whose molecular assembly creates a relatively strong electrostatic field. The activation entropy of the bound water is negative and this suggests that water molecules assume some ordered structure in the bound state.     

Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.     

Carburizing of titanium with plasma jets under reduced pressure

The carburizing of titanium with argon-methane (0.1%) and argon-methane (0.1%)-hydrogen (2%) plasma jets at a pressure of 200 Torr was studied. The carburizing of titanium was not successful with the argon-methane plasma jet because the specimen was covered with graphitic carbon. A hard and thick TiC layer was formed by the argon-methane-hydrogen plasma jet in a short time without the deposition of graphitic carbon. Emission spectra from the plasma jets show that the addition of hydrogen increases the amount of CH radicals as well as decreases the amount of C₂ and C in the plasma jet. The decrease of C₂ and C suppresses the deposition of graphitic carbon and enhances the TiC formation.Partly presented at Gordon Research Conference on Plasma Chemistry, August 11–15, 1986, Tilton, New Hampshire.     

Preconcentration of palladium(II) from water with thionalide loaded on silica gel

2-Mercapto-N-2-naphthylacetamide (thionalide) on silica gel is used for rapid preconcentration of μg l^?1 levels of palladium(II) from aqueous solution, followed by atomic absorption spectrometric measurement. In batch experiments, palladium was quantitatively retained on the gel from solutions 5 M in acid to pH 8; equilibrium was achieved within 10 s. The chelating capacity of the gel was 7.5 μmol Pd g^?1 at pH < 4. The effect of flow rate on retention was studied. Palladium retained on the column was completely eluted with 20 ml of 0.2 M thiourea in 0.1 M hydrochloric acid. The palladium concentration in sea water is shown to be < 0.3 μg l^?1.     

Preparation of rapidly disintegrating tablet using new types of microcrystalline cellulose (PH-M series) and low substituted-hydroxypropylcellulose or spherical sugar granules by direct compression method

To decrease the sensation of roughness when a tablet, which is rapidly disintegrated by saliva (rapidly disintegrating tablet), is orally taken, we prepared rapidly disintegrating tablets using microcrystalline cellulose (Avicel PH-M series), a new type of pharmaceutical excipient that is spherical and has a very small particle size (particle size, 7-32 microm), instead of conventional microcrystalline cellulose (PH-102) used in the formulation of tablets containing acetaminophen or ascorbic acid as model drugs for tableting study. Tablets (200 mg) prepared using spherical microcrystalline cellulose, PH-M-06, with the smallest particle size (mean value, 7 microm) had sufficient crushing tolerance (approximately, 8 kg) and were very rapidly, disintegrated (within 15 s) when the mixing ratio of PH-M-06 to low-substituted hydroxypropylcellulose (L-HPC) was 9:1. Sensory evaluation by volunteers showed that PH-M-06 was superior to PH-102 in terms of the feeling of roughness in the mouth. Consequently, it was found that particle size is an important factor for tablet preparation using microcrystalline cellulose. It is possible to prepare drugs such as acetaminophen and ascorbic acid (concentration of approximately 50%) in the tablet form using PH-NM-06 in combination with L-HPC as a good disintegrant at a low compression force (1-6 kN). To solve the problem of poor fluidity in the preparation of these tablets, we investigated the use of spherical sugar granules (Nonpareil, NP-101 (sucrose and starch, composition ratio of 7:3), NP-103 (purified sucrose), NP-107 (purified lactose) and NP-108 (purified D-mannitol)). Rapidly disintegrating tablets can be prepared by the direct compression method when suitable excipients such as fine microcrystalline cellulose (PH-M-06) and spherical sugar granules (NP) are used.